Posts Tagged ‘fly rod’

Sage went back to the drawing board to create the incredible Z-Axis Series Fast Action Rods. By improving the entire rod-building process, we created a rod that’s significantly lighter, stronger and easier to cast for anglers of all skill levels. The Z-Axis offers an entirely new level of fishability with unprecedented line feel, response and performance. But don’t take our word for it-come on by and take it for a test spin. Also available in a two handed configuration. Click: www.flyfishingoutfitters.com Call: 1.866.672.1959

I am a beginner at fly fishing and need a good fly line that can be used for bass and bluegill and handle flies that are small enough for bluegills mouths but large enough for bass to take it. I will be using a 5 wt. fly rod and a X4 leader. Also I need a floating line. Any recommendations and advice would be appreciated, thanks.

Bassmaster993,

If you are out there, Pheasant Tail asked me to add this to my answer of your question about which line to use for bass fishing.

I was away from my computer fly fishing for Coho salmon at Tofino, British Columbia. Your question closed so I couldn’t add it to my answer.

I thought if you are reviewing these questions you may run into this one.

Hope you have a great bass fishing trip.

Larry

How to set up a fly rod————–

Can you go to a person who knows what they are doing to get help? If so, I would strongly recommend it. Otherwise, give this a try. You need to learn it anyway.

Did you buy a package deal, that gave you a rod, reel, backing, line, leader and flies?

Or, did you buy separate pieces.

If you bought the package deal, then everything should match up, however I have seen some all-in-one outfits that were not fit to be called fly rods.

If you bought separate pieces, then I hope someone guided you through the purchases. Like is the fly rod the size (as in the weight of the rod, not the actual weight (yes, here is where you start scratching your head trying to figure out what I am saying) but the indicated weight of the rod. Like is it a 5 weight or a 6 weight, or did you buy a specialty rod, like a 2 or 3 weight or a 8 or 9 weight?

What kind of fish you are going for, is the determining factor in what size rod to buy.

Then your reel has to match up fairly close to the rod. Reels are sold with designators indicating that they are for a 5 or 6 weight or a 7 to 8 weight or a 2 to 3 weight rod. This is important. You can not use a 2/3 weight reel on a 6 weight rod. The line will totally fill the reel and there will be no room for backing or anything else. Also, the reel helps balance the rod while you are casting. So, if you have an ultra light reel on a heavy rod, the balance of the reel is going to be way up the rod somewhere, not down at the cork handle you are holding on to. That means you will have a hard time casting and wear yourself out faster than you should.

So, let’s hope the reel matches the rod.

Eric is right, use the Arbor knot to tie on the backing to the center spool of your reel. But first, do you want to reel this in with your right hand, thus holding the rod with your left hand, or do you want to reel it in with your left hand holding the rod with your right hand? I am going to assume you are right handed, if not the question simply needs to be reversed.

With small fish you can get away with casting with your strong hand and then switching the rod over to your other hand to reel in the line when you have a fish on. However, if you are going after big fish, then it is best to hold the rod with your strong hand and reel with your other hand, since it is your strong hand that has to hold the rod during the fight. Your muscles and mind-hand coordination are better with your strong hand.

Stop right here: You want to have at least one guide to put your backing through before you tie you it to the reel, so make sure you thread the backing and later the line through a guide. Some rods require you to put two pieces together to get a guide to use.

The line has to come off the bottom of the reel. Let’s say you are right handed and decided to reel in with your left hand (best choice). Tie the backing on so the line comes onto the reel from the bottom front and wraps up behind the reel then back out the top front, tie your arbor knot.

Reel in all of your backing if it is a complete outfit, otherwise you will have to play around with finding the right amount of backing. The papers that came with your reel should tell you how much backing in 20 pound Dacron or 30 pound Dacron your reel will take, but how are you to know how much you have reeled on? (I usually take my reel to my local fly shop and have them load it for me).

The backing serves two purposes. First, it helps fill the reel with line so your fly line does not have to be wound up in such small circles (that really causes a problem with the line). Also, if you hook into a big one or hook a tree or rock then you have some extra line to play with to get to shore or back up to where you snagged up the line. Fly lines are expensive and you do not want to be loosing those.

Eric is right, the nail knot is an excellent knot to use to tie the backing onto the fly line. In fact, once you learn to tie the knots, then you can tie two nail knots in a row onto your fly line. If the first nail knot should fail, the second one should hold.

Below are some websites you can go to in order to learn to tie the knots you need to learn. Practice with some string, two different colored ones if you can, and learn how to tie the knots we mention.

You now have the backing tied onto your line. Usually there is a little tag that mentions which end should be tied to the backing. If not, then if you are using a weight forward line, the backing gets tied to the end that has the really long and slender line. The other end has a very short slender line then very quickly thickens up, then slowly thins back down. That is the end you tie your leader onto.

So, tie your backing onto your fly line and now you need to reel it in. I prefer to take a small long box and punch a pencil or small 1/4 inch dowel through one side, push on your lines plastic holder then push the pencil out the other side. Now your line will come off the spool nice and straight and not twist on you.

Once you have reeled in all the line, now you will find out if you used too much backing because your line will not fit smoothly onto the reel. Best bet, strip your line out, and then take off some backing, cut it and tie the line back onto the backing and reel it in again.

Now you come to your leader. It has a loop on it you said. That makes it handy, but then you have to have a loop on the line or you can not use it. Some lines being made now have loops built into them. If you do not have one of those, then the best thing you can do is tie a short piece of mono onto your fly line then tie in a loop at the other end.

For now, use the nail knot to tie the mono to your line. The thicker the leader, the fewer the wraps you need to form a nail knot, but the rule of thumb is 4 or 5 turns. You can buy a nail knot tool, I would strongly recommend it, and it makes tying nail knots super easy with just a little practice. The key to any nail knot is to pull the tag end of the leader quickly and smoothly. If you go slow you end up with a horrible looking knot. If you practice ahead of time, you will tie a good looking nail knot.

For a short piece of mono I have often just cut off a foot of my leader, the thick end, and tied it to my line, then tied in a small loop using a Perfection Loop knot. If the leader came with a loop, then you have a built in loop, but you will then have to tie a Perfection Knot loop back into your leader.

It is important that this short, 4 to 5 inch piece of leader be just about as thick as the line, you can not use a real limp and small size piece of mono. If you do you will not be able to transfer the power of the cast into your leader.

If you are going to tie on a tippet to the other end of the leader I suggest learning the Blood Knot or the Improved Surgeon’s Knot. The blood knot may be the best one to use.

When putting the rod together, line up the guides and push the pieces together with an equal amount of pressure from both hands. The guides have to line up for proper casting. After an hour or so of casting, make sure you test the sections to keep them from slowly coming apart.

Now tie on a small piece of yarn and learn how to cast.

Here are three sites you can go to and learn about knot tying for fly fishing. I really love the Animated Knots by Grog site, the first one listed.

Good luck.

Larry

http://www.animatedknots.com/indexfishing.php?LogoImage=LogoGrog.jpg&Website=www.animatedknots.com

http://globalflyfisher.com/fishbetter/knots/table.php

http://www.flyfisherman.com/skills/lkknots/index.html

SAGE Blue Gill Rod 2009 – Jerry Siem introduces the new Blue Gill fly rod at the 2009 Retailer show in Denver, CO before giving an on the water demonstration with tips and tricks for casting Sage’s new fly rod.

i just got this fly rod from a estate sale alone with a bunch of other stuff, but anyway its 3pcs about three and a half feet each part, there is only one eye and its on the tip, i was told thats how they were made back in the 20′s and 30′s, i was watching the johnny cash movie walk the line, and when they are fishing in the begining when he was a kid its that kind of rod, its in very good condition, there is no name or part number on it, i just want to kno what its worth, i dont want to seel cuz iam a big angler, and into getting old stuff just looking for some info on it, anything would help i can get some pics of it. please someone help me!!!!! i have been looking around the web and the only thing i get is a headack.

SUBSCRIBE ! 30 MILES OUT fish’n show! today we head offshore with the flyrods looking for busting spanish… we run into some rolling tarpon on the way out! check it out!

I have inherited a fly rod which sat unused in an attic for a number of years . The reel just "free spins" and there doesn’t appear to be any drag action at all- Is it broken, or do I just need to adjust it somehow? I’d really like to use this takle to fish with, but just don’t know if it is usable. Any help is greatly appreciated!
This reel has no markings, but is attached to a 8′ or 8.5′ 7 weight rod-

I see fly fisherman use very thick, bright colored line. I know that the thickness is necessary because all of the weight comes from the line itself. The only thing I am confused with is how this works for bass. I hear people always saying that the bass will not bite if the line is to thick or visible. Well, doesn’t catching them on orange thick line contradict this? What lures do you use to catch them on a fly rod? Please I am very interested and any information will help.
To the first answerer, and any others who think of answering the same way, I am not asking about the components of the fly rod. I want to know about the details on catching specifically BASS on them. I would also like to know about lure selection for this species and why the thick, bright colored line doesn’t spook them.

and what resultant difficulties would arise if the wrong weight fly line (either too heavy or too light) was matched with the wrong weight fly rod?

I have an old south bend fly rod!!

my grat uncle gave it to me, so its old

can u give me a price range of wat its worth???
I think it may be about 0!!!
I have a case and its a BAMBOO flyrod from hte 50′s or 60′s